| Tham số | Giá trị |
|---|---|
| Mục | Specifications |
| Nhận xét | If not specified, the ambient temperature for measurement is +20℃+68℉. |
| Cân nặng | New weight : 790 g approx. |
| Chi tiết | Standard fan type |
| Sản phẩm | Fan Type Ionizer |
| Vật liệu | Enclosure : ABS, Louver : ABS, Discharge needle unit : PBT, Discharge needle : Tungsten, Bracket : SPHC |
| Các chỉ số | Discharge error (Red), Fan error (Red), Power (Green), Discharge (Green) |
| Phụ kiện | Straight louver : 1 pc. (Note), Angle louver : 1 pc., Caution label : 1 set, Rubber cushion : 1 pc.(Note): The discharge needle unit is loaded on the straight louver before shipment. |
| Cân bằng ion | ±10 V or less(Note): Typical value at 300 mm11.811infrom directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. |
| Mã số linh kiện | ER-F12A |
| Tên sản phẩm | Fan Type Ionizer ER-F |
| Chức năng chính | Error output, Discharge halt input |
| Mã sản phẩm | ER-F12A |
| Điện áp nguồn | 24 V DC ±10% |
| Độ ẩm môi trường | 35% RH to 65% RH (No dew condensation allowed),Storage : 35% RH to 65% RH |
| Phương pháp xả | High-frequency AC method |
| Phương pháp nối đất | C (capacitor) grounding |
| Tạo ra ozone | 0.04 ppm or less(Note): Typical value at 200 mm7.874infrom directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. |
| Nhiệt độ môi trường xung quanh | 0℃ to +50℃+32℉ to +122℉(No dew condensation allowed),Storage : -10℃ to +65℃+14℉ to +149℉ |
| Thời gian sạc | 1 sec. approx.(±1,000 V → ±100 V)(Note): Typical value at 200 mm7.874infrom directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. |
| Mức tiêu thụ hiện tại | 700 mA or less |
| Các quy định áp dụng | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Điện áp đầu ra xả | ± 2 kV approx. |
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn cài đặt và vận hành