| Tham số | Giá trị |
|---|---|
| Mục | Specifications |
| Cân nặng | Main unit: 790 g approx. |
| Chi tiết | Low-volume fan type |
| Sản phẩm | Fan Type Ionizer |
| Vật liệu | Enclosure: ABS, Louver: ABS, Discharge needle unit: PBT, Discharge needle: Tungsten, Bracket: SPHC |
| Các chỉ số | Discharge error (Red), Fan error (Red), Power (Green), Discharge (Green) |
| Phụ kiện | Straight louver: 1 pc. (Note), Angle louver: 1 pc., Caution label: 1 set, Rubber cushion: 1 pc.(Note) The discharge needle unit is loaded on the straight louver before shipment. |
| Cân bằng ion | plus or minus10 V or less(Note) Typical value at 300 mm 11.811 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. |
| Mã số linh kiện | ER-F12S |
| Tên sản phẩm | Fan Type Ionizer ER-F |
| Chức năng chính | Error output, Discharge halt input |
| Tốc độ quạt tối đa | 4.0 m/s(Note) Typical value at 300 mm 11.811 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. |
| Mã sản phẩm | ER-F12S |
| Điện áp nguồn | 24 V DC plus or minus10% |
| Âm lượng quạt tối đa | 2.50 m3/min |
| Độ ẩm môi trường | 35 to 65% RH (No dew condensation) , Storage: 35 to 65% RH |
| Phương pháp xả | High-frequency AC method |
| Phương pháp nối đất | C (capacitor) grounding |
| Tạo ra ozone | 0.04 ppm or less(Note) Typical value at 200 mm 7.874 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. |
| Nhiệt độ môi trường xung quanh | 0 to +50degrees +32 to +122degrees Fahrenheit (No dew condensation) , Storage: –10 to +65degrees +14 to +149degrees Fahrenheit |
| Thời gian sạc | 1.5 sec. approx. (plus or minus1,000 V to plus or minus100 V)(Note) Typical value at 200 mm 7.874 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. |
| Mức tiêu thụ hiện tại | 400 mA or less |
| Điện áp đầu ra xả | plus or minus 2 kV approx. |
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn cài đặt và vận hành