| Tham số | Giá trị |
|---|---|
| Mục | Specifications |
| Cáp | Shielded cable with connector, 1 m3.281 ftlong |
| Chi tiết | Sensor head |
| Sản phẩm | Compact Type 4 Safety Beam Sensor |
| Vật liệu | Enclosure: PBT (Polybutylene terephthalate)Lens: AcrylicIndicator cover: Acrylic |
| Mã số linh kiện | ST4-A1-J1 |
| Tên sản phẩm | Compact Type 4 Safety Beam Sensor ST4 |
| Điện áp nguồn | Supplied from controller |
| Mã sản phẩm | ST4-A1-J1 |
| Đối tượng cảm biến | φ9 mmφ0.354 inor more opaque object |
| Dây nối dài | Extention up to total 50 m164.042 ftis possible for both emitter and receiver with exclusive cable. |
| Phạm vi hoạt động | 0.1 to 15 m0.328 to 49.213 ft(Note:The operating range is the possible setting distance between the emitter and the receiver. It can detect sensing object of less than 0.1 m 0.328 ft away.) |
| Phần tử phát xạ | Infrared LED (Peak emission wavelength: 870 nm0.034 mil) |
| Độ chiếu sáng xung quanh | Incandescent lamp: 3,500 Lx or less at the light-receiving face |
| Mức tiêu thụ hiện tại | Emitter: 11 mA or lessReceiver: 9 mA or less |
| Tiêu chuẩn áp dụng | IEC 61496-1/2 (JIS B 9704-1/2 / UL 61496-1/2) (Type 4), ISO 13849-1:2015 (Category 4, PLe), JIS B 9705-1 (Category 4), IEC 61508-1 to 3 (SIL3), IEC 62061 (SIL3), JIS C 0508-1 to 3 (SIL3), UL 1998, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA R15.06, ANSI/ISA S84.01 (SIL3)(Note) Complies with those standards only when the sensor head is used in combination with the controller ST4-C11 / ST4-C12EX. |
| Chỉ báo phát xạ chùm tia | Green LED (lights up during beam emission, lights off during emission halt) |
| Góc khẩu độ hiệu dụng | plus or minus 2.5degrees or less for operating range exceeding 3 m 9.843 ft (required by IEC 61496-2 / UL 61496-2) |
| Chỉ báo gián đoạn chùm tia | Red LED (lights up when the beam is interrupted or lock out, lights off during reception)(Note) Shows light interruption information between the emitter and the receiver with the same address. It does not show OSSD output. |
| Chỉ báo chùm tia tới ổn định | Green LED (lights up under stable light received condition, lights off under unstable light received condition) |
| Tuân thủ chỉ thị đánh dấu CE | Machinery Directive, EMC Directive, RoHS Directive |
| Trọng lượng (Tổng trọng lượng của bộ phát và bộ thu) | Net weight: 100 g approx.Gross weight: 140 g approx. |
| Khả năng chống chịu môi trường: Độ ẩm môi trường xung quanh | 30 to 85 % RH, Storage: 30 to 95 % RH |
| Khả năng chống chịu môi trường: Khả năng chống va đập | 300 m/s2acceleration in X, Y and Z directions three times each |
| Khả năng chống chịu môi trường: Nhiệt độ môi trường xung quanh | -10 to +55 ℃+14 to +131℉(No dew condensation or icing allowed),Storage: -25 to +70 ℃-13 to +158℉ |
| Khả năng chống chịu môi trường: Mức độ bảo vệ | IP67 (IEC) |
| Khả năng chống chịu môi trường: Khả năng chống rung | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 90 m/s2 in X, Y and Z directions for two hours each< |
| Khả năng chống chịu môi trường: Khả năng cách điện | 20 MOhm or more with 500V DC megger between all supply terminals connected together and enclosure |
| Khả năng chống chịu môi trường: Khả năng chịu điện áp | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn cài đặt và vận hành