| Tham số | Giá trị |
|---|---|
| Mục | Specifications |
| PFHD | 3.66 × 10-9(Note) Probability of dangerous failure per hour. |
| Cáp | 0.16 mm25-core heat-resistant PVC cable, 3 m 9.842 ft long |
| MTTFD | 100 years or more(Note) Mean time to dangerous failure. |
| Chi tiết | Hand protection type Min. sensing object ø25 mmø0.984 in(20 mm0.787 inbeam pitch) |
| Sản phẩm | Ultra-slim Light Curtain [Type 2 PLc SIL1] |
| Vật liệu | Enclosure: Polycarbonate alloySensing surface: Polycarbonate alloyMS-SFC-1 (Standard mounting bracket): Stainless steel (SUS) |
| Góc chùm tia | 20 mm0.787 in |
| Phụ kiện | MS-SFC-1 (Standard mounting bracket): 1 setSF4C-TR25 (Test rod): 1 No. |
| Mã số linh kiện | SF2C-H12-P |
| Tên sản phẩm | Ultra-slim Light Curtain [Type2 PLc SIL1] SF2C |
| Điện áp nguồn | 24 V DC plus or minus 20 % Ripple P-P 10 % or less |
| Thời gian phản hồi | OFF response: 20 ms or lessON response: 80 to 100 ms |
| Mã sản phẩm | SF2C-H12-P |
| Dây nối dài | Extension up to total 50m is possible for 0.3mm2or more, cable |
| Phạm vi hoạt động | 0.1 to 3 m0.328 to 9.843 ft |
| Phần tử phát xạ | Infrared LED (Peak emission wavelength: 850 nm0.034 mil) |
| Mức độ ô nhiễm | 3 |
| Chiều cao bảo vệ | 240 mm9.449 in |
| độ cao hoạt động | 2, 000 m6561.680 ftor less(Note) Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m. |
| Độ chiếu sáng xung quanh | Incandescent light: 5,000 ℓx or less at the light-receiving face |
| Khóa đầu ra (SSD) | - Maximum sink current: 60mA- Applied voltage: same as supply voltage (between the lockout output and +V)- Residual voltage: 2.5V or less (source current 60mA, when using 10m length cable)- Leakage current: 200micro A or less (power supply OFF condition)- Maximum load capacity: 2.2micro F (No load to maximum output current)- Load wiring resistance: 3Ω or less |
| Đối tượng cảm biến tối thiểu | ø25 mmø0.984 inopaque object |
| Kiểm tra chức năng nhập liệu | Incorporated |
| Ngõ ra điều khiển (OSSD) | - Maximum source current: 200mA- Applied voltage: same as supply voltage (between the control output and +V)- Residual voltage: 2.5V or less (source current 200mA, when using 10m length cable)- Leakage current: 200micro A or less (power supply OFF condition)- Maximum load capacity: 2.2micro F (No load to maximum output current)- Load wiring resistance: 3Ω or less |
| Số lượng kênh chùm tia | 12 |
| Góc khẩu độ hiệu dụng | plus or minus 5℃ or less [for an operating range exceeding 3 m 9.843 ft (conforming to IEC 61496-2 / ANSI/UL 61496-2) ] |
| Tiêu chuẩn áp dụng: Nhật Bản | JIS B 9704-1 / 2 (Type 2), JIS B 9705-1 (Category 2), JIS C 0508-1 to 3 (SIL 1) |
| Tiêu chuẩn áp dụng: Châu Âu | EN 61496-1 (Type 2), EN ISO 13849-1:2015 (Category 2, PLc), EN 61508-1 to 3 (SIL 1), EN 55011, EN 50178, EN 61000-6-2(Note) Regarding EU Machinery Directive, a Notified Body, TÜV SÜD, has certified with the type examination certificate. |
| Chức năng ngăn ngừa nhiễu | Incorporated |
| Tiêu chuẩn áp dụng: Bắc Mỹ | ANSI / UL 61496-1 / 2 (Type 2), ANSI / UL 508, CAN / CSA 61496-1 / 2 (Type 2), CAN / CSA C22.2 No.14, ANSI / RIA 15.06(Note) With regards to the standards in the US/Canada, a Notified Body, TÜV SÜD, has certified the CTÜVUS mark. |
| Ngõ ra khóa (SSD): Chế độ hoạt động | ON during normal operation, OFF during lockout(Note) If the emitter enters a lockout state, and light from the emitter enters the receiver, lockout information will be transmitted and lockout output (SSD) will turn OFF. |
| Ngõ ra điều khiển (OSSD): Chế độ hoạt động | ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the safety light curtain or the synchronization signal) |
| Chức năng chỉ báo đa năng lớn | Incorporated |
| Ngõ ra khóa (SSD): Mạch bảo vệ | Incorporated |
| Ngõ ra điều khiển (OSSD): Mạch bảo vệ | Incorporated |
| Các quy định và chứng nhận áp dụng | CE Marking (Machinery Directive, EMC Directive, RoHS Directive), UKCA Marking [Supply of Machinery (Safety) Regulations, EMC Regulations, RoHS Regulations], TÜV SÜD certification |
| Khả năng chống chịu môi trường: Độ ẩm môi trường xung quanh | 30 to 85 % RH, Storage: 30 to 85 % RH |
| Khả năng chống chịu môi trường: Khả năng chống va đập | 300 m / s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| Khối lượng tịnh (Tổng khối lượng của bộ phát và bộ thu) | 340 g approx. |
| Tiêu chuẩn áp dụng: Tiêu chuẩn quốc tế | IEC 61496-1 / 2 (Type 2), ISO 13849-1:2015 (Category 2, PLc), IEC 61508-1 to 3 (SIL 1) |
| Khả năng chống chịu môi trường: Nhiệt độ môi trường xung quanh | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: - 25 to +60 ℃- 13 to +140 ℉ |
| Khả năng chống chịu môi trường: Mức độ bảo vệ | IP65, IP67 (IEC) |
| Khả năng chống chịu môi trường: Khả năng chống rung | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Khả năng chống chịu môi trường: Khả năng cách điện | 20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Khả năng chống chịu môi trường: Khả năng chịu điện áp | 1, 000 V AC for one min. between all supply terminals connected together and enclosure |
| Mức tiêu thụ điện hiện tại: Đèn báo đa năng lớn sáng lên. | Emitter: 35 mA or lessReceiver: 35 mA or less |
| Mức tiêu thụ điện hiện tại: Đèn báo đa năng lớn tắt | Emitter: 30 mA or lessReceiver: 30 mA or less |
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn cài đặt và vận hành