| Tham số | Giá trị |
|---|---|
| Mục | Specifications |
| Cáp | 0.09-mm24-core cabtyre cable, PVC, 3 m9.843 ftlong |
| Đầu ra | PNP open-collector transistor・Maximum source current: 50 mA・Applied voltage: 30 V DC or less (between output and + V)・Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current) |
| Nhận xét | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃+73.4 ℉. |
| Cân nặng | Net weight: 30 g approx.Gross weight: 35 g approx. |
| Chi tiết | Compact / Cable type [F type] |
| Sản phẩm | Amplifier Built-in / U-shaped Micro Photoelectric Sensor |
| Vật liệu | Enclosure: PBTDisplay section: Polycarbonate |
| Hiện tượng trễ | 0.05 mm0.002 inor less |
| Sự bảo vệ | IP64 (IEC) |
| Mã số linh kiện | PM-F45-P-C3 |
| Tên sản phẩm | Amplifier Built-in / U-shaped Micro Photoelectric Sensor [Compact / Cable type]PM-45 |
| Khả năng lặp lại | 0.01 mm0.0004 inor less |
| Thời gian phản hồi | Under light received condition: 20 μs or lessUnder light interrupted condition: 80 μs or less(Maximum response frequency: 3 kHz)(Note)(Note) : Refer to the note on the specification page for the response frequency. |
| Phạm vi cảm biến | 6 mm0.236 in(fixed) |
| Chiều dài dây | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable.(Note 1) : If the cable is extended to 20 m65.617 ftor longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher.(Note 2) : For safety applications, do not exceed 30 m98.425 ft. |
| Mã sản phẩm | PM-F45-P-C3 |
| Điện áp nguồn | 5 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Độ ẩm môi trường | 5 to 85 % RH, Storage: 5 to 95 % RH |
| Phần tử phát xạ | Infrared LED (Peak emission wavelength: 855 nm0.034 mil, non-modulated) |
| Mức độ ô nhiễm | 3 |
| Khả năng chống sốc | 15,000 m/s2acceleration (1,500 G approx.) in X, Y and Z directions three times each |
| Độ chiếu sáng xung quanh | Fluorescent light: 1,000 ℓx at the light-receiving face |
| Nhiệt độ môi trường xung quanh | -25 to +55 ℃-13 to +131 ℉(No dew condensation or icing allowed), Storage: -30 to +80 ℃-22 to +176 ℉ |
| Mức tiêu thụ hiện tại | 15 mA or less |
| Chỉ báo hoạt động | Orange LED (lights up under light received condition) |
| Khả năng chống rung | 10 to 2,000 Hz frequency, 1.5 mm0.059 indouble amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each |
| Điện trở cách điện | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Đối tượng cảm biến tối thiểu | 0.8 × 1.2 mm0.031 × 0.047 inopaque object |
| Đầu ra:Thao tác đầu ra | Incorporated with 2 outputs: Light-ON / Dark-ON |
| Khả năng chịu điện áp | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Đầu ra: Bảo vệ ngắn mạch | Incorporated |
| Các quy định và chứng nhận áp dụng | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), ISO 13849-1 (Category 1, PLc) (Note), UL/c-UL certification(Note) : Conformed from December 2021 production. |
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn cài đặt và vận hành