| Tham số | Giá trị |
|---|---|
| Mục | Specifications |
| Cáp | - |
| Đầu ra | NPN open-collector transistorMaximum sink current: 100 mAApplied voltage: 30 V DC or less (between output and 0 V)Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Cân nặng | Net weight: 4 g approx.Gross weight: 80 g approx.(10 piece package) |
| Chi tiết | Connector type L type(Top sensing) |
| Sản phẩm | Convergent Reflective Micro Photoelectric Sensor PM2 |
| Vật liệu | Enclosure: Polycarbonate, Terminal part: HSM (Ag plated) |
| Hiện tượng trễ | 20 % or less of operation distance with white non-glossy paper(15 × 15 mm0.591 × 0.591 in) |
| Mã số linh kiện | PM2-LL10 |
| Chiều dài cáp | Total length up to 2 m6.562 ftis possible with 0.3 mm2, or more, cable.(If the cable is extended for 2 m6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.) |
| Tên sản phẩm | Convergent Reflective Micro Photoelectric Sensor PM2 |
| Thời gian phản hồi | 0.8 ms or less |
| Phạm vi cảm biến | 2.5 to 8 mm0.098 to 0.315 in(Conv. point: 5 mm0.197 in) with white non-glossy paper (15 × 15 mm0.591 in × 0.591 in)(Note)The sensing range may extend up to 12.5 mm0.492 inwith white non-glossy paper due to product variation. |
| Mã sản phẩm | PM2-LL10 |
| Điện áp nguồn | 5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less |
| Độ ẩm môi trường | 45 to 85 % RH, Storage: 45 to 85 % RH |
| Phần tử phát xạ | Infrared LED (Peak emission wavelength: 880 nm0.035 mil, modulated) |
| Mức độ ô nhiễm | 3 (Industrial environment) |
| Khả năng chống sốc | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Độ chiếu sáng xung quanh | Incandescent light: 3,500 lx or less at the light-receiving face |
| Nhiệt độ môi trường xung quanh | –10 to +55 ℃+14 to +131℉(No dew condensation or icing allowed),Storage: –25 to +80 ℃–13 to +176℉ |
| Mức tiêu thụ hiện tại | Average: 25 mA or less, Peak: 80 mA or less |
| Chỉ báo hoạt động | Red LED (lights up when the output is ON) |
| Khả năng chống rung | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Chỉ thị về nhãn CE | EMC Directive, RoHS Directive |
| Đối tượng cảm biến tối thiểu | ø0.05 mmø0.002 incopper wire (Setting distance: 5 mm0.197 in) |
| Kết quả: Danh mục sử dụng | DC-12 or DC-13 |
| Đầu ra: Bảo vệ quá dòng | Incorporated |
| Độ lặp lại (vu perpendicular với trục cảm biến) | 0.08 mm0.003 inor less(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm0.591 × 0.591 in) at a setting distance of 5 mm0.197 in. |
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn cài đặt và vận hành