| Tham số | Giá trị |
|---|---|
| Mục | Specifications |
| Cáp | 0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong |
| Đầu ra | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
| Cân nặng | Net weight: Emitter 80 g approx., Receiver 85 g approxGross Weight: 210 g approx. |
| Chi tiết | PNP output |
| Sản phẩm | Small / Slim Object Detection Area Sensor |
| Vật liệu | Enclosure: Heat-resistant ABSLens: AcrylicIndicator cover: Acrylic |
| Sự bảo vệ | IP62 (IEC) |
| Mã số linh kiện | NA1-11-PN |
| Tên sản phẩm | Small / Slim Object Detection Area Sensor NA1-11 |
| Cao độ phần tử | 10 mm0.394 in |
| Thời gian phản hồi | In Dark state: 5 ms or lessIn Light state: 10 ms or less |
| Phạm vi cảm biến | 0.17 to 1 m0.558 to 3.281 ft(Note:The sensing range is the possible setting distance between the emitter and the receiver. The sensor can detect an object less than 0.17 m 0.558 ft away.) |
| Mã sản phẩm | NA1-11-PN |
| Cảm biến chiều cao | 100 mm3.937 in |
| Đối tượng cảm biến | ø13.5 mmø0.531 inor more opaque object(Note:Although this product can detect slim objects by using the cross-beam scanning system, the size of the slim object which can be stably detected differs with the setting distance. When this sensor is used to detect slim objects, make sure to confirm stable detection using the actual objects.) |
| Điện áp nguồn | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Dây nối dài | Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable. |
| Độ ẩm môi trường | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Phần tử phát xạ | Infrared LED (Peak emission wavelength: 880nm0.035mil, cross-beam scanning system) |
| Mức độ ô nhiễm | 3 (Industrial environment) |
| Khả năng chống sốc | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Chỉ báo: Bộ phát | Power indicator: Green LED (lights up when the power is ON)Large indicator: Orange LED (lights up or blinks when the large indicator input is High, lighting pattern is selected by operation mode switch) |
| Độ chiếu sáng xung quanh | Incandescent light: 3,000 lx or less at the light-receiving face |
| Nhiệt độ môi trường xung quanh | -10 to 55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| Mức tiêu thụ hiện tại | Emitter: 80 mA or lessReceiver: 100 mA or less |
| Các chỉ báo: Bộ thu | Operation indicator: Orange LED (lights up when the output is ON)Power indicator: Green LED (lights up when the power is ON)Large indicator: Orange LED (lights up or blinks when the large indicator input is High, lighting pattern is selected by operation mode switch) |
| Khả năng chống rung | 10 to 150 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Điện trở cách điện | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Đầu ra:Thao tác đầu ra | ON or OFF when beam channel is interrupted, selectable by operation mode switch |
| Khả năng chịu điện áp | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Kết quả: Danh mục sử dụng | DC-12 or DC-13 |
| Tuân thủ chỉ thị đánh dấu CE | EMC Directive, RoHS Directive |
| Đầu ra: Bảo vệ ngắn mạch | Incorporated |
| Số lượng phần tử phát/thu | 11 Nos. each on the emitter and the receiver, respectively |
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn cài đặt và vận hành