Còn hàng Sản phẩm nổi bật
ULSH901
ULSH901 LS-H901 PANASONIC Sensor head, retro reflective, range 1m, cable 2m
$0.00
USD
3159 còn hàng
Thông số kỹ thuật chính
Mục:
Specifications
Cáp:
0.09 mm22-core two parallel shielded cables, 2 m 6.562 ft long(Note：Cable cannot be extended.)
Cân nặng:
Net weight: 50 g approx.Gross weight: 85 g approx.
Chi tiết:
Sensor heads(Coaxial retroreflective type)
Thông tin nhà cung cấp
PANASONIC
Sản phẩm: 4316
Thường giao hàng trong vòng 2-3 ngày làm việc.
Đảm bảo chất lượng
Giao hàng nhanh
Hỗ trợ kỹ thuật
Thông số kỹ thuật
| Tham số | Giá trị |
|---|---|
| Mục | Specifications |
| Cáp | 0.09 mm22-core two parallel shielded cables, 2 m 6.562 ft long(Note：Cable cannot be extended.) |
| Cân nặng | Net weight: 50 g approx.Gross weight: 85 g approx. |
| Chi tiết | Sensor heads(Coaxial retroreflective type) |
| Sản phẩm | Amplifier-separated Type Digital Laser Sensor |
| Vật liệu | Enclosure: PBTIndicator cover: PolycarbonateBeam-emitting / receiving surfaces: Glass |
| Phụ kiện | MS-LS-1(Mounting bracket): 1pc.RF-330(Refrector): 1pc. |
| Kích thước điểm | Approx. dia. 6 mm dia. 0.236 in or less (at a distance from the sensor head of 1 m 3.281 ft) |
| Sự bảo vệ | IP40 (IEC) |
| Mã số linh kiện | LS-H901 |
| Tên sản phẩm | Amplifier-separated Type Digital Laser Sensor LS-500 |
| Mã sản phẩm | LS-H901 |
| Đối tượng cảm biến | Opaque, translucent, or transparent object(Note：Make sure to confirm detection with an actual sensor before use.) |
| Độ ẩm môi trường | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Khả năng chống sốc | 98 m / s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| Phạm vi cảm biến: HYPR | 0.01 to 2.5m0.033 to 8.202 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Phạm vi cảm biến: U-LG | 0.01 to 2m0.033 to 6.562 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Độ chiếu sáng xung quanh | Incandescent light: 3,000 ℓx or less at the light-receiving face |
| Nhiệt độ môi trường xung quanh | -10 to +55degrees + 14 to + 131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70degrees -4 to +158 degrees Fahrenheit |
| Chỉ báo hoạt động | Orange LED (lights up when the amplifier output is ON) |
| Khả năng chống rung | 10 to 500 Hz frequency, 1.5 mm double amplitude or maximum acceleration 98 m/s2in X, Y, and Z direction for 2 hours each. |
| Bộ khuếch đại áp dụng | LS-501(P), LS-501(P)-C2(Note：When using the thru-beam typeLS-H101□orLS-H102□, do not set the receiving light sensitivity (gctL) of the applicableLS-500series amplifier to level 2 or less. This is because there is a possibility of sensing becoming unstable.) |
| Phần tử phát xạ: Loại | Red semiconductor laser diode |
| Điện trở cách điện | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Tuân thủ quy định | EMC Directive, RoHS Directive |
| Phạm vi cảm biến: Chế độ tiêu chuẩn | 0.01 to 1m0.033 to 3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Phạm vi cảm biến: Chế độ NHANH | 0.01 to 1m0.033 to 3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Phạm vi cảm biến: Chế độ H-SP | 0.01 to 1m0.033 to 3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Phạm vi cảm biến: Chế độ U-LG | 0.01 to 1.5m0.033 to 4.921 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Khả năng chịu điện áp | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Bộ phận phát xạ: Loại laser | Class 1 [IEC / EN / JIS / GB / KS / FDA](Note：This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3. |
| Phần tử phát xạ: Đầu ra tối đa | 1mW |
| Nguyên tố phát xạ: Bước sóng phát xạ cực đại | 660 nm 0.026 mil |
Mô tả sản phẩm
LS500. Sensor head, reflection on mirror, range 1m
Các tính năng chính
- Chất lượng cấp công nghiệp
- Tuân thủ tiêu chuẩn RoHS
- Đạt chứng nhận CE
- Bảo hành 1 năm
Tài liệu sản phẩm
Bảng dữ liệu
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn sử dụng
Hướng dẫn cài đặt và vận hành
