| Tham số | Giá trị |
|---|---|
| Mục | Specifications |
| Kiểu | Standard type |
| Cáp | 0.1mm210-core cabtyre cable, 5 m16.404 ftlong |
| Nhận xét | Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20 ℃+68 ℉, sampling rate 500 μs, average number of samples: 1024, measurement center distance, object measured is made of white ceramic and analog measurement values. |
| Cân nặng | Net weight: 70 g approx. (not including cable), 320 g approx. (including cable)Gross weight: 380 g approx. |
| Chi tiết | Sensor head (Standard type) |
| Sản phẩm | Compact Laser Displacement Sensor |
| Vật liệu | Enclosure: PBTFront cover: AcrylicCable: PVC |
| Phụ kiện | Warning label: 1 set |
| Tính tuyến tính | ± 0.1 % F.S. |
| Nghị quyết | 1.5 μm0.059 mil |
| Đầu vào đa dạng | Zero set, zero set off, reset, memory switching, teaching, saving, and laser control according to the input time.In case NPN output is selected, Function varies according to the time 0 V is connected NPN.In case PNP output is selected, Function varies according to the time external power + is connected. |
| Mã số linh kiện | HL-G105-A-C5 |
| Nguồn sáng | Red semiconductor laser, Class 2 (IEC / EN / JIS / GB / KS / FDA (Note:This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3.Max. output: 1 mW (Peak emission wavelength: 655 nm0.026 mil) |
| Tên sản phẩm | Compact Laser Displacement Sensor HL-G1 |
| Đầu vào thời gian | NPN output operates when 0V is connected and NPN is set. (It depends on the setting.)PNP output operates when external power + is connected and PNP is set. (It depends on the setting.) |
| Đường kính chùm tia | 0.5 × 0.1 mm0.020 x 0.039 in(Note) This beam diameter is the size at the measurement center distance. These values were defined by using 1/e2(13.5 %) of the center light intensity. Ifthere is a slight leakage of light outside the normal spot diameter and if the periphery surrounding the sensing point has a higher reflectivity than thesensing point itself, then the results may be affected. |
| Tốc độ lấy mẫu | 200 μs, 500 μs, 1 ms, 2 ms |
| Mã sản phẩm | HL-G105-A-C5 |
| Điện áp nguồn | 24 V DC ± 10 % including ripple 0.5 V (P-P) |
| Màn hình kỹ thuật số | Red LED 5 digit display |
| Phạm vi đo | ± 10 mm± 0.394 in |
| Chỉ báo: Báo động | Orange LED lights up when this product cannot measure because of insuffienct or excessive light intensity. |
| Phần tử nhận | CMOS image sensor |
| độ cao hoạt động | 2,000 m6561 ftor less |
| Mức tiêu thụ hiện tại | 100 mA or less |
| Mức độ ô nhiễm | 2 |
| Điện trở cách điện | 20 MOhm , or more, with 250 V DC between all supply teminals connected together and enclosure |
| Tuân thủ quy định | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Ngõ ra tương tự: Dòng điện | Output range: 3.2 to 20.8 mA (normal), 21.6 mA (alarm)Load impedance: 300 Ω or less |
| Ngõ ra tương tự: Điện áp | Output range: 0 to +10.5 V (normal), 11 V (alarm)Output impedance: 100 Ohm |
| Khả năng chịu điện áp | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Chỉ báo: Phát xạ laser | Green LED (lights up during laser emission) |
| Khoảng cách tâm đo | 50 mm1.969 in |
| Đặc điểm nhiệt độ | ± 0.08 % F.S. / ℃ |
| Chỉ báo: Phạm vi đo | Three yellow LED |
| cài đặt cực tính đầu ra đầu vào | NPN open collector output operates when 0 V is connected.PNP open collector output operates when 24 V DC is connected. |
| Đầu ra (OUT 1, OUT 2, OUT 3) | Judgment output or alarm output (Setting can be selected.)Selectable NPN transistor open-collector or PNP transistor open-collector-Maximum sink current: 50 mA-Applied voltage: 3 to 24 V DC (between output and 0 V)-Residual voltage: 2 V or less (at 50 mA of sink current)-Maximum source current: 50 mA-Residual voltage: 2.8 V or less (at 50 mA of source current) |
| Khả năng chống chịu môi trường: Bảo vệ | IP67 |
| Khả năng chống chịu môi trường: Độ ẩm môi trường xung quanh | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Khả năng chống chịu môi trường: Khả năng chống va đập | 500 m/s2acceleration (50 G approx.) in X,Y and Z directions three times each |
| Khả năng chống chịu môi trường: Độ chiếu sáng xung quanh | Incandescent light: 3,000 liter x or less at the light-receiving face(Note) The fluctuation by ambient illuminance is ± 0.1 % F.S. or less. |
| Khả năng chống chịu môi trường: Nhiệt độ môi trường xung quanh | -10 to +45 ℃+14 to +113 ℉(No dew condensation allowed), Storage: -20 to +60 ℃-4 to +140 ℉ |
| Khả năng chống chịu môi trường: Khả năng chống rung | 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm0.059 indouble amplitude in X,Y and Z directions for two hours each |
| Đầu ra (OUT 1, OUT 2, OUT 3): Thao tác đầu ra | Opened when the amount of light is insufficient. |
| Ngõ ra (OUT 1, OUT 2, OUT 3): Bảo vệ ngắn mạch | Incorporated (automatic restoration) |
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn cài đặt và vận hành