| Tham số | Giá trị |
|---|---|
| When communication unitis connected | |
| Mục | Specifications |
| Cáp | 0.2 mm22-core (brown and blue lead wires) / 0.15 mm27-core composite cable, 2 m6.562 ftlong |
| Chi tiết | Slave unit / Wire-saving type |
| Sản phẩm | Controller |
| Vật liệu | Case: Polycarbonate, Cover: Polycarbonate, Switches: Polyacetal |
| Trọng lượng tịnh | 60 g approx. |
| Mã số linh kiện | HG-TC113 |
| 1 đến 7 đơn vị | 1 to 6 units |
| Tên sản phẩm | Thru-beam Type Digital Displacement Sensor HG-T |
| 8 đến 15 đơn vị | 7 to 14 units |
| Phạm vi hiển thị | -199.999 to 199.999 mm-7.874 to 7.874 in |
| Tốc độ lấy mẫu | 1 ms (standard sampling) / 0.5 ms (high-speed sampling) |
| Mã sản phẩm | HG-TC113 |
| Điện áp nguồn | 24 V DC ±10 %, including ripple 0.5 V (P-P) |
| Mức độ ô nhiễm | 2 |
| Độ phân giải màn hình | 1 μm0.039 mil |
| độ cao hoạt động | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| Mức tiêu thụ hiện tại | 100 mA or less (when sensor head is connected)(Note) : Current consumption does not include analog current output. |
| Tuân thủ quy định | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Đầu cảm biến áp dụng | HG-T1010、HG-T1110 |
| Số lượng trung bình (thời gian phản hồi) | 1 time (2 ms), 2 times (3 ms), 4 times (5 ms), 8 times (9 ms), 16 times (17 ms), 32 times (33 ms), 64 times (65 ms), 128 times (129 ms), 256 times (257 ms), 512 times (513 ms), and 1,024 times (1,025 ms) switching type(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling). |
| Số lượng đơn vị phụ được kết nối | Maximum sink current and sourcecurrent of control output |
| Khả năng chống chịu môi trường: Bảo vệ | IP40(IEC) |
| Số lượng tối đa các bộ điều khiển có thể kết nối | Up to 15 slave units can be connected to a master unit.(Note) : When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit. |
| Khả năng chống chịu môi trường: Độ ẩm môi trường xung quanh | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Khả năng chống chịu môi trường: Khả năng chống va đập | 98m/s2acceleration (10 G approx.) in X, Y and Z directions five times each |
| Khả năng chống chịu môi trường: Nhiệt độ môi trường xung quanh | -10 to +50 ℃+14 to +122 ℉(No dew condensation or icing allowed) (Note), Storage: -20 to +60 ℃-4 to +140 ℉(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.Number of connected slave unitsMaximum sink current and sourcecurrent of control outputAmbient temperatureWhen communication unitis connected1 to 7 units1 to 6 units20 mA-10~+45℃+14 to +113 ℉8 to 15 units7 to 14 units10 mA |
| Khả năng chống chịu môi trường: Khả năng chống rung | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude (10 to 58 Hz), Maximum acceleration 49 m/s2(58 to 150 Hz) in X, Y and Z directions for two hours each |
| Khả năng chống chịu môi trường: Khả năng cách điện | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Khả năng chống chịu môi trường: Khả năng chịu điện áp | 1,000 V AC for one minute between all supply terminals connected together and enclosure |
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn cài đặt và vận hành