| Tham số | Giá trị |
|---|---|
| Mục | Specifications |
| Cáp | 5-core composite cable, 2 m6.5617 ftlong |
| Cân nặng | Net weight: 35 g approx. (without cable), 85 g approx. (including cable) |
| Chi tiết | Measurement center 200mm 7.874 in type |
| Sản phẩm | CMOS type Micro Laser Distance Sensor |
| Vật liệu | Enclosure: Aluminum die-castFront cover: Acrylic |
| Tính tuyến tính | ±0.2%F.S. |
| Sự bảo vệ | IP67 (IEC) |
| Mã số linh kiện | HG-C1200 |
| Nguồn sáng | Red semiconductor laser Class 2 [IEC / EN/ JIS / GB / KS / FDA (Note) ]Max. output: 1 mWemission peak wavelength: 655 nm0.026 mil(Note) This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3. |
| Tên sản phẩm | CMOS type Micro Laser Distance Sensor HG-C |
| Đường kính chùm tia | ø300 μm11.8111 milapprox.(Note) This is the size in the measurement center distance. These values were defined by using 1/e2(13.5% approx.) of the center light intensity. Due to leak light outside the specified area, the reflectance around the detecting point may be higher than at the point and this may affect the measurement value. |
| Khả năng lặp lại | 200 μm7.874 mil |
| Thời gian phản hồi | Switchable between 1.5 ms / 5 ms / 10 ms |
| Đầu ra điều khiển | NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (Between control output to 0V)- Residual voltage: 1.5 V or less (At 50 mA sink current)- Leakage current: 0.1 mA or less |
| Đầu vào bên ngoài | NPN non-contact input- Input conditionsInvalid: +8 to +V DC or OpenValid: 0 to +1.2 V DC- Input impedance: 10 kΩ approx. |
| Mã sản phẩm | HG-C1200 |
| Điện áp nguồn | 12 to 24 V DC ±10 %, Ripple P-P 10 % or less |
| Dây nối dài | Extension up to total 10 m393.701 ftis possible with 0.3 mm2, or more, cable. |
| Phạm vi đo | ±80 mm3.150 in |
| Độ ẩm môi trường | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Mức độ ô nhiễm | 2 |
| Khả năng chống sốc | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| độ cao hoạt động | 2,000 m6561.680 ftor less |
| Độ chiếu sáng xung quanh | Incandescent light: 3,000 ℓx or less at the light-receiving face |
| Nhiệt độ môi trường xung quanh | -10 to +45 ℃-14 to 113 ℉(No dew condensation or icing allowed), Storage: -20 to +60 ℃-4 to 140 ℉ |
| Mức tiêu thụ hiện tại | 40 mA or less (at 24V DC supply voltage)65 mA or less (at 12V DC supply voltage)Note : Specifications have been changed from shipment in August, 2016. For shipment before July 2016 : 40 mA or less (at 24 V DC supply voltage), 60 mA or less (at 12 V DC supply voltage) |
| Khả năng chống rung | 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Khoảng cách tâm đo | 200 mm7.874 in |
| Đặc điểm nhiệt độ | 0.03% F.S./℃ |
| Ngõ ra điều khiển: Hoạt động ngõ ra | Either Light-ON or Dark-ON |
| Ngõ ra tương tự: Ngõ ra dòng điện tương tự | • Output range: 4 to 20mA (at alarm: 0mA)• Output impedance: 300Ω or lessNote : Analog current output has been added from shipment in August 2016. |
| Ngõ ra tương tự: Ngõ ra điện áp tương tự | • Output range: 0 to 5 V (at alarm: +5.2 V)• Output impedance: 100Ω |
| Ngõ ra điều khiển: Bảo vệ ngắn mạch | Incorporated (Auto reset type) |
| Các quy định và chứng nhận áp dụng | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), FDA Regulations, UL/c-UL Certification(Note) : The UL/c-UL certified products have been shipped since April, 2017. |
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn cài đặt và vận hành