| Tham số | Giá trị |
|---|---|
| Mục | Specifications |
| Cáp | 0.15 mm24-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m6.562 ftlong |
| Đầu ra | PNP open-collector transistor- Maximum source current: 50 mA- Applied voltage: 26.4 V DC or less (between output and +V)- Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current) |
| Chi tiết | Thru-beam type |
| Sản phẩm | Amplifier Built-in Ultra-compact Laser Sensor |
| Vật liệu | Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate |
| Phụ kiện | MS-EXL2-2 (Mounting plate): 2 pcs. |
| Sự bảo vệ | IP67 (IEC) |
| Mã số linh kiện | EX-L212-P-C5 |
| Tên sản phẩm | Amplifier Built-in Ultra-compact Laser Sensor EX-L200 |
| Khả năng lặp lại | Perpendicular to sensing axis: 0.05 mm0.0020 inor less |
| Thời gian phản hồi | 0.5 ms or less |
| Phạm vi cảm biến | 3 m9.843 ft |
| Mã sản phẩm | EX-L212-P-C5 |
| Đối tượng cảm biến | Opaque object of ø3 mmø0.118 inor more |
| Điện áp nguồn | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Đèn báo nguồn | - |
| Độ ẩm môi trường | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Phần tử phát xạ | Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB/ EN/ KS) (Note:This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH(Center for Devices and Radiological Health) under the FDA (Food and Drug Administration)(Maximum output: 1 mW, Peak emission wavelength: 655 nm0.026 mil) |
| Khả năng chống sốc | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Độ chiếu sáng xung quanh | Incandescent light: 3,000 lx or less at the light-receiving face |
| Nhiệt độ môi trường xung quanh | -10 to +55 ℃+14 to +131 ℉(No dew condensation or no icing condition),Storage: -30 to +70 ℃-22 to +158 ℉ |
| Mức tiêu thụ hiện tại | Emitter: 10 mA or lessReceiver: 10 mA or less |
| Chỉ báo hoạt động | Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type) |
| Chỉ báo độ ổn định | Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type) |
| Bộ điều chỉnh độ nhạy | - |
| Khả năng chống rung | 10 to 500 Hz frequency, 1.5 mm0.059 indouble amplitude (10 G max.) in X, Y and Z directions for two hours each |
| Điện trở cách điện | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Tuân thủ quy định | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Đầu ra:Thao tác đầu ra | Light-ON / Dark-ON selectable by the output operation switching input |
| Khả năng chịu điện áp | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Kích thước điểm phát xạ (Điển hình) | Approx. 8 × 5.5 mm0.315 × 0.217 in(vertical × horizontal)(at a sensing distance of 1 m)(Note) In the case sensing distance is 3 m9.843 ft, the emission spot size is H 17 × W 11 mmH 0.669 × W 0.433 in(visual reference value). |
| Đầu ra: Bảo vệ ngắn mạch | Incorporated (short-circuit protection / inverse polarity protection) |
| Vật thể cảm biến tối thiểu (Điển hình) | - |
| Độ lặp lại (Điển hình) (vu perpendicular với trục cảm biến) | - |
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn cài đặt và vận hành