| Tham số | Giá trị |
|---|---|
| Mục | Specifications |
| Cáp | 0.1 mm2 3-core cabtyre cable, 2 m 6.562 ft long |
| Đầu ra | NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) |
| Cân nặng | Net weight: 20 g approxGross weight: 45 g approx |
| Chi tiết | Retroreflective[Side sensing] |
| Sản phẩm | Ultra-compact Photoelectric Sensor |
| Vật liệu | Enclosure: Polyethylene terephthalateLens: Polyalylate |
| Phụ kiện | RF-200 (Reflector): 1 pcAdjusting screwdriver: 1 pc |
| Hiện tượng trễ | - |
| Sự bảo vệ | IP67 (IEC) |
| Mã số linh kiện | EX-29A |
| Tên sản phẩm | Ultra-compact Photoelectric Sensor EX-20 Ver.2 |
| Thời gian phản hồi | 0.5 ms or less |
| Phạm vi cảm biến | 30 to 200 mm 1.181 to 7.874 in(Note) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-200 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 30 mm 1.181 in away. However, if the reflector is set 100 mm 3.937 in or less away, the sensing object should be opaque. |
| Mã sản phẩm | EX-29A |
| Đối tượng cảm biến | dia. 15 mm dia. 0.591 in or more opaque or translucent object(Note) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-200 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 30 mm 1.181 in away. However, if the reflector is set 100 mm 3.937 in or less away, the sensing object should be opaque.(Note) Make sure to confirm detection with an actual sensor before use. |
| Điện áp nguồn | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Dây nối dài | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable. |
| Độ ẩm môi trường | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Phần tử phát xạ | Red LED (modulated) |
| Khả năng chống sốc | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Độ chiếu sáng xung quanh | Incandescent light: 3,000 lx or less at the light-receiving face |
| Nhiệt độ môi trường xung quanh | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit |
| Mức tiêu thụ hiện tại | 13 mA or less |
| Chỉ báo hoạt động | Orange LED (lights up when the output is ON) |
| Chỉ báo độ ổn định | Green LED (lights up under stable light received condition or stable dark condition) |
| Bộ điều chỉnh độ nhạy | Continuously variable adjuster |
| Khả năng chống rung | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (20 G max.) in X, Y and Z directions for two hours each |
| Điện trở cách điện | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Công tắc chế độ hoạt động | - |
| Khả năng chịu điện áp | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Kết quả: Danh mục sử dụng | DC-12 or DC-13 |
| Tuân thủ chỉ thị đánh dấu CE | EMC Directive, RoHS Directive |
| Đầu ra: Bảo vệ ngắn mạch | Incorporated |
| Nguyên tố phát xạ: Bước sóng phát xạ cực đại | 680 nm 0.027 mil |
| Độ lặp lại (vu perpendicular với trục cảm biến) | 0.5 mm 0.020 in or less |
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn cài đặt và vận hành