| Tham số | Giá trị |
|---|---|
| Mục | Specifications |
| Cáp | Suitable for round cable φ9 to φ11 mmφ0.354 to φ0.433 in |
| Đầu ra | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
| Cân nặng | Net weight: 85 g approx. |
| Chi tiết | DC-voltage |
| Sản phẩm | Adjustable Range Reflective Photoelectric Sensor |
| Vật liệu | Enclosure: ABSFront cover: PolycarbonateDisplay cover: Polycarbonate |
| Phụ kiện | Adjusting screwdriver: 1 pc. |
| Hiện tượng trễ | 10 % or less of operation distance(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object. |
| Sự bảo vệ | IP67 (IEC) |
| Mã số linh kiện | EQ-511 |
| Chiều dài cáp | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cabtyre cable. |
| Tên sản phẩm | Adjustable Range Reflective Photoelectric Sensor EQ-500 |
| Chế độ cảm biến | Switchable either BGS or FGS function |
| Thời gian phản hồi | 2 ms or less |
| Mã sản phẩm | EQ-511 |
| Điện áp nguồn | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Chức năng hẹn giờ | - |
| Phạm vi điều chỉnh | 0.2 to 2.5 m0.656 to 8.202 ft(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m0.328 ft, or more, away.(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
| Độ ẩm môi trường | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Phần tử phát xạ | Infrared LED (Peak emission wavelength: 855 nm0.034 mil, modulated) |
| Khả năng chống sốc | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Phương thức kết nối | Screw-on terminal connection |
| Bộ điều chỉnh khoảng cách | 2-turn mechanical adjuster with indicator |
| Phần tử nhận | 2-segment photodiode |
| Độ chiếu sáng xung quanh | Incandescent light: 3,000 Lx or less at the light-receiving face |
| Nhiệt độ môi trường xung quanh | –20 to +55 ℃–4 to +131℉(No dew condensation or icing allowed),Storage: –30 to +70 ℃–22 to +158℉ |
| Chỉ báo hoạt động | Orange LED (lights up when the output is ON) |
| Chỉ báo độ ổn định | Green LED (lights up under stable operating condition) |
| Khả năng chống rung | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Điện trở cách điện | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Đầu ra:Thao tác đầu ra | Switchable either Detection-ON or Detection-OFF |
| Khả năng chịu điện áp | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Công suất/Dòng điện tiêu thụ | 45 mA or less |
| Tuân thủ chỉ thị đánh dấu CE | EMC Directive, RoHS Directive |
| Đầu ra: Bảo vệ ngắn mạch | Incorporated |
| Chức năng tự động ngăn ngừa nhiễu | Incorporated(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object. |
| Phạm vi cảm biến (ở khoảng cách cài đặt tối đa) | 0.1 to 2.5 m0.328 to 8.202 ft(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn cài đặt và vận hành