| Tham số | Giá trị |
|---|---|
| Mục | Specifications |
| Kiểu | Ultra low inertia |
| Trục | Key-way, center tap |
| Sản phẩm | Servo Motor |
| Đặc trưng | Compact Servo Only for Position Control. |
| gioăng dầu | without |
| Bao vây | IP65 |
| Khối lượng (kg) | 1.36 |
| Mã số linh kiện | MUMA022P1T |
| Tên sản phẩm | MINAS E series Servo Motor |
| Công suất định mức | 200 W |
| Phanh giữ | with |
| Về khu vực bao quanh | Except rotating portion of output shaft and leadwire end. |
| Mô-men xoắn định mức (N ⋅ m) | 0.64 |
| Thông số điện áp | 200 V |
| Dòng điện định mức (A (rms)) | 1.6 |
| Điều kiện môi trường | For more details, please refer to the instruction manual. |
| Bộ mã hóa quay: Độ phân giải | 10000 |
| Tốc độ quay định mức (vòng/phút) | 3000 |
| Bộ mã hóa quay: thông số kỹ thuật | 2500 P/r Incremental |
| Về tần số phanh tái tạo | Note) 1. Regenerative brake frequency represents the frequency of the motor's stops from the rated speed with deceleration without load.⋅ If the load is connected, frequency will be defined as 1/( m + 1 ), where m = ( load moment of inertia ) / ( rotor moment of inertia ).⋅ When the motor speed exceeds the rated speed, regenerative brake frequency is in inverse proportion to the square of ( running speed / rated speed ).⋅ Power supply voltage is AC115 V ( at 100 V of the main voltage ). If the supply voltage fluctuates, frequency is in inverse proportion to the square of ( Running supply voltage /115 ) relative to the value in the table.⋅ When regeneration occurs continuosly such cases as running speed frequently changes or vertical feeding, consult us or a dealer.Note) 2. If the effective torque is within the rated torque, there is no limit in regenerative brake. |
| Tốc độ quay tối đa định mức (vòng/phút) | 5000 |
| Mô-men xoắn cực đại tức thời (N ⋅ m) | 1.91 |
| Tần suất phanh tái tạo (lần/phút) | Without option :No limitWith option :No limitOption (External regenerative resistor) Part No. : DV0P2891 |
| Mômen quán tính của rôto ( x10-4kg ⋅ m²) | 0.13 |
| Tỷ số mômen quán tính khuyến nghị giữa tải và rôto | 30 times or less |
| Về tỉ số mômen quán tính khuyến nghị giữa tải và rôto | Note) 3. Consult us or a dealer if the load moment of inertia exceeds the specified value. |
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn cài đặt và vận hành