| Tham số | Giá trị |
|---|---|
| Mục | Specifications |
| Cáp | Cabtyre cable, 0.5 m 1.640 ft long with connector |
| Cân nặng | 300 g approx. (including cable) |
| Chi tiết | Sensor head (Middle distance High precision) |
| Sản phẩm | Ultra High-speed High-precision Laser Displacement Sensor |
| Vật liệu | Enclosure: Die-cast aluminumCase cover: Die-cast aluminumFront cover: Glass |
| Phụ kiện | English warning label: 1 set [The FDA regulations conforming type includes a set of both the IEC label (written in English) and JIS label (written in Japanese)]. |
| Tính tuyến tính | plus or minus 0.03 % F.S.(Note) Indicates error with respect to the ideal linear values for digital displacement output when standard objects were measured by our company. It may vary depending on the types of objects being measured. |
| Chế độ thiết lập | Diffuse reflectiveSpecular reflective |
| Mã số linh kiện | HL-C211F5E |
| Nguồn sáng | Red semiconductor laser (Peak emission wavelength: 658 nm 0.026 mil)Class 3R (IEC / JIS), Class IIIa (FDA)Max. output: 5 mW |
| Tên sản phẩm | Ultra High-speed・High-precision Laser Displacement Sensor HL-C2 |
| Đường kính chùm tia | dia. 80 micro m dia. 3.150 mil approx.(Note) This beam diameter is the size at the measurement center distance. These values were defined by using 1/e2 (13.5 %) of the center light intensity.If there is a slight leakage of light outside the normal spot diameter and if the periphery surrounding the sensing point has a higher reflectivity than the sensing point itself, then the results may be affected. |
| Mã sản phẩm | HL-C211F5E |
| Dây nối dài | Extension up to total 30 m 98.425 ft is possible, with optional cable. |
| Phạm vi đo | Diffuse reflective: plus or minus 15 mm plus or minus 0.591 inSpecular reflective: plus or minus 14.5 mm plus or minus 0.571 in(Note) Measuring range at sampling periods of 20 micro s and 10 micro s is as follows.[Diffuse reflective]20 micro s: +0.5 to +15.0 mm +0.020 to +0.591 in10 micro s: +12.5 to +15.0 mm +0.492 to +0.591 in[Specular reflective]20 micro s: +0.5 to +14.5 mm +0.020 to +0.571 in10 micro s: +12.5 to +14.5 mm +0.492 to +0.571 in |
| Phần tử nhận | Linear image sensor |
| Chỉ báo: Phát xạ laser | Green LED (lights up during laser emission) |
| Chỉ báo: Phạm vi đo | Yellow LED(lights up when near the measurement center distance, blinks when within the measuring range, and lights out when outside of the measuring range.) |
| Khoảng cách tâm đo | Diffuse reflective: 110 mm 4.331 inSpecular reflective: 106.7 mm 4.201 in |
| Đặc điểm nhiệt độ | 0.01 % F.S./degrees |
| Khả năng chống chịu môi trường: Bảo vệ | IP67 (IEC) (excluding the connector) |
| Độ phân giải [Số lượng mẫu trung bình] | 0.25 micro m 0.010 mil [256](Note) The P-P value for the deviation in the digital measurement values at the measurement center range has been converted for the measurement center distance. |
| Khả năng chống chịu môi trường: Độ ẩm môi trường xung quanh | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Khả năng chống chịu môi trường: Khả năng chống va đập | 196 m/s2 acceleration (20 G approx.) in X,Y and Z directions for three times each |
| Khả năng chống chịu môi trường: Độ chiếu sáng xung quanh | Incandescent light: 3,000 liter x at the light-receiving face |
| Khả năng chống chịu môi trường: Nhiệt độ môi trường xung quanh | 0 to +45 degrees +32 to +113 degrees Fahrenheit (No dew condensation), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| Khả năng chống chịu môi trường: Khả năng chống rung | 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in amplitude in X,Y and Z directions for two hours each |
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn cài đặt và vận hành