| Tham số | Giá trị |
|---|---|
| Mục | Specifications |
| Đầu ra | NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.0 V or less (at 50 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Chi tiết | General purpose |
| Sản phẩm | Leak Detection Sensor |
| Vật liệu | Enclosure: Polypropylene |
| Sự bảo vệ | IP67 (IEC) |
| Mã số linh kiện | EX-F72-C5 |
| Tên sản phẩm | Leak Detection Sensor EX-F70/EX-F60 |
| Thời gian phản hồi | 50 ms or less |
| Mã sản phẩm | EX-F72-C5 |
| Đối tượng cảm biến | Water, Fluorinert™Note:Highly viscous liquid may not be detected stably.Note:Fluorinert is the world wide trademark of 3M. |
| Điện áp nguồn | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Dây nối dài | Extension up to total 50 m164.042 ft |
| Chỉ báo LỖI | Red LED (lights up when the leak liquid is detected, or the sensor is mounted improperly) |
| Độ ẩm môi trường | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Phần tử phát xạ | Infrared LED (non-modulated) |
| Chỉ số bình thường | Green LED (lights up when the sensor is mounted properly) |
| Độ chiếu sáng xung quanh | Incandescent light: 1,000 ℓx or less at the light-receiving face |
| Nhiệt độ môi trường xung quanh | -10 to +60 ℃+14 to +140 ℉(No dew condensation or icing allowed), Storage: -20 to +70 ℃- 4 to +158 ℉Note : Liquid being detected should also be kept within the rated ambient temperature range. |
| Mức tiêu thụ hiện tại | 10 mA or less(PNP output type: 15 mA or less) |
| Đầu ra:Thao tác đầu ra | In normal state: ON, When leak detected or the sensor is mounted improperly: OFF |
| Đầu ra: Bảo vệ ngắn mạch | Incorporated |
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn cài đặt và vận hành