| Tham số | Giá trị |
|---|---|
| Fiber amplifierconnector | |
| Mục | Functions |
| Hình dạng | Type |
| Chức năng | Power tuning |
| Đã được đấu dây sẵn | AND/OR output |
| Đầu ra NPN | PNP output |
| Cài đặt I/O | Output setting (select from channel 2 output, AND, OR, leading edge sync, falling edge sync, or differential output) |
| Thời gian phản hồi | Super-high-speed mode |
| Chế độ tiêu chuẩn | 1 ms for operation and reset respectively |
| Chức năng hẹn giờ | Select from OFF-delay, ON-delay, or one-shot timer.1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 10-ms increments,200 ms to 1 s set in 100-ms increments, and 1 to 5 s set in 1 s-increments) |
| Màn hình kỹ thuật số | Select from the following: Incident level for channel 1 + incident level for channel 2, Incident level + threshold, incident level percentage + threshold, incident light peak level + no incident light bottom level, minimum incident light peak level + maximum no incident light bottom level, long bar display, incident level + peak hold, incident level + channel |
| Mạch bảo vệ | Power supply reverse polarity protection, output short-circuit protection, mutual interference prevention |
| Cài đặt độ nhạy | Teaching and digital up/down keys |
| Mức độ bảo vệ | IEC 60529 IP50 (with protective cover attached) |
| Chế độ độ phân giải cao | 4 ms for operation and reset respectively |
| Điện áp nguồn | 12 to 24 VDC±10%, ripple (p-p) 10% max. |
| Đầu nối khuếch đại quang 1 | AND/OR output |
| Nguồn sáng (bước sóng) | Red LED (650 nm) |
| Cáp PVC 30 cm với đầu cắm M8 (4 chân) | E3X-CN21-M3J-2 0.3M |
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn cài đặt và vận hành