| Tham số | Giá trị |
|---|---|
| Mục | Specifications |
| Trưng bày | 4 digit 7-segment red LED display(letter height: 8 mm0.315 in) |
| Sản phẩm | Ultra-compact Digital Panel Controller |
| Vật liệu | Enclosure: Polycarbonate |
| Chức năng | Auto-reference function, zero-adjust function, scale setting function, threshold value setting function, hysteresis setting function, comparative output timer function, start / hold function, memory clear function, power supply ON-delay function etc. |
| Trọng lượng tịnh | Net weight: 55 g approx. |
| Mã số linh kiện | CA2-T2 |
| Tên sản phẩm | Ultra-compact Digital Panel Controller CA2 |
| Bộ nhớ dự phòng | Non-volatile memory (EEPROM), Guaranteed write operations: 1,000,000 or less |
| Mã sản phẩm | CA2-T2 |
| Điện áp nguồn | 24 V DC ± 10 % Ripple P-P 10 % or less |
| Phương pháp kết nối | Terminal block connection |
| Mức tiêu thụ điện năng | 2.8 W or less |
| Thiết lập độ phân giải | 1 digit |
| Bắt đầu / giữ đầu vào | High level (supply voltage, or open): Start, Low level (1.5 V or less): Hold |
| Màn hình: Phạm vi hiển thị | Selectable span of 4,000 Nos. between -9999 to +9999 is displayed. ("+" is not displayed) |
| Màn hình: Độ chính xác của màn hình | ±(0.1 % F.S. + 1 digit) at 23 ± 5 ℃73.4 ± 41 ℉, 35 to 85 % RH |
| Đầu vào tương tự: Phạm vi đầu vào | 1 to 5 V |
| Các chỉ báo: Hoạt động OUT2 | Orange LED(Measurement mode: Lights up when OUT 2 is ON. Blinks when display is changed to OUT 2 threshold value display.Setting mode: Blinks when OUT 2 threshold value and comparison conditions are set or when full scale of scale setting function is set.) |
| Đầu vào tương tự: Phương thức nhập liệu | Single end input |
| Chỉ báo: Hoạt động ĐẦU RA 1 | Orange LED(Measurement mode: Lights up when OUT 1 is ON. Blinks when display is changed to OUT 1 threshold value display.Setting mode: Blinks when OUT 1 threshold value and comparison conditions are set or when zero scale of scale setting function is set.) |
| Đầu vào tương tự: Số lượng đầu vào | 1 No. |
| Đầu vào tương tự: Tốc độ lấy mẫu | Selectable from 200 times/sec., 20 times/sec., 10 times/sec. or 5 times/sec. |
| Phạm vi cài đặt giá trị ngưỡng | -9999 to +9999 |
| Màn hình: Tốc độ làm mới màn hình | Selectable from 20 times/sec., 10 times/sec., 5 times/sec., 2.5 times/sec., 1 time/sec. or 0.5 time/sec. |
| Đầu vào tương tự: Trở kháng đầu vào | 1 MΩ |
| Các chỉ báo: Chỉ báo cực tính | Red LED(lights up when the displayed value or the threshold value is negative) |
| Kết quả so sánh (OUT 1, OUT 2) | NPN open-collector transistor・ Maximum sink current: 100 mA・ Applied voltage: 35 V DC or less (between comparative output and GND)・ Residual voltage:1.3 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Đầu vào tương tự: Phương pháp chuyển đổi A/D | Successive approximation method |
| Màn hình: Đặc tính nhiệt độ | ±0.5 % F.S. over 0 to +50 ℃+32 to +122 ℉ |
| Các chỉ báo: Hoạt động tự tham chiếu | Green LED(lights up when auto-reference function is used) |
| Khả năng chống chịu môi trường: Độ ẩm môi trường xung quanh | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Khả năng chống chịu môi trường: Khả năng chống va đập | 294 m/s2(30 G) acceleration in X, Y and Z directions three times each |
| Kết quả so sánh (OUT 1, OUT 2): Hiện tượng trễ | Variable from 1 to 3,999 digits |
| Khả năng chống chịu môi trường: Nhiệt độ môi trường xung quanh | 0 to +55 ℃+32 to +131 ℉(No dew condensation), Storage: -20 to +70 ℃-4 to +158 ℉ |
| Khả năng chống chịu môi trường: Khả năng chống rung | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Khả năng chống chịu môi trường: Khả năng cách điện | 100 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Kết quả so sánh (OUT 1, OUT 2): Thời gian phản hồi | 5 ms or less(when start / hold input is used at a sampling rate of 200 times/sec.) |
| Khả năng chống chịu môi trường: Khả năng chịu điện áp | 1,500 V AC for one min. between all supply terminals connected together and enclosure |
| Đầu vào điều chỉnh về 0 (0-ADJ.) / Đầu vào tự tham chiếu (A-REF.) | Input condition: Non-voltage contact or NPN open-collector transistor inputSignal condition: Negative logic, Input time duration 10 ms or moreSignal level: ON ... 1.5 V or less (output current: 10 mA or less), OFF ... Supply voltage or openGuaranteed No. of zero-adjust input usage: 10 million times or less (for zero-adjust back-up setting) |
Thông số kỹ thuật và dữ liệu hiệu năng
Hướng dẫn cài đặt và vận hành